Blog Archives

The Finished Cabin Model 2

For the site plan of the cabin, I used a large board of wood with a big piece of foam that I got from my dad from his workplace. The foam was covered with some green cloth that I found around my house. The intention of the foam was to let me pluck in small trees into the foam, as it was very difficult to glue/tape on the tiny trees. A river was made from an Aeropostal bag (as I couldn’t find anything blue to put on), and the wind-turbine generator was made from paper/Bristol board.

The following explains about how I made the insides of my model:

For the windows, I cut out small sheets of plastic and then taped them within the inner walls of the cabin with duct tape. I then covered the inner walls with white paper, which helped hide the duct tape and the cardboard. For other parts of the cabin (including the rocket stove and the bathroom) I pieced together some cardboard using a glue gun and then covered them with white paper to hide the zig-zag patterns of the cardboard. For the doors and the ladder, I used some leftover balsa wood from my classmates and then glued them on wherever I needed them. For the foundation, I used four small pieces of wood to elevate the cabin.

Here are some more pictures of the cabin:

 

 

Modeling

Going back to my “Functions of a Cabin (and any other house)” post, now I need to design a rustic-looking cabin that includes all the functions that I’ve talked about (volumetric space design, energy systems, water systems, waste management systems and climate control system). To “design” means that I just have to draw out the cabin from different views (inner, outer, site plan…) and write out a bill of materials for all the things that I’m using for the cabin, including a rocket stove, which was explained in my “Rocket Stove to the Sky” post. I’ve already done all of that, though, and I will be posting pictures later of some of my drawings/bill of materials. NOW, I have to make a model of my cabin that I’ve been designing.

For the cabin, I chose to use cardboard to make all my outer/inner walls (although balsa wood would have worked much better) I got the cardboard from No Frills for free, and I’ve already covered most of it with white printing paper to be painted over, later on. My foundation is just a large wooden plank and my site plan (including trees and a river) consists of items that I got from dollar shop (Christmas decorations). I haven’t completed the cabin yet, but I’ll be sure to post pictures of it when I’m done.

Anyways, here are some pictures of other people’s professional-looking models:

d0r