Monthly Archives: October 2011

Designing Condominiums

          The airplane project that I recently had didn’t go as well as I hoped it would. But now, I have a newer project at hand; to build a miniature condominium.

          Like all condominiums, I must include a kitchen, one bathroom, one (or more) rooms, a living room and one of those rooms in which one puts their water heating tank in along with doing their laundry. In addition, the condominium must take up a maximum space of 800 square feet. Oh yeah, and if I were to add a balcony to the condominium, then the area would not count as a part of the 800 square feet limit that I am given. One more thing; the budget for the condominium is unlimited. Right now, I’m still doing the 3 thumbnail floor plans. The plans are just roughly drawn to give me an idea to what kind of condominium  I want to build; however they all must follow the regulations for all condominiums, like the minimum amount of space there must be between the bathtub and any other part of the building that takes up space, and that one cannot hold a swimming pool in or out of the condominium. 

          With an unlimited budget, I can install anything (legal) I want into the condominium! I could add trap doors and speakers all around the house and a Bidet toilet (a type of super cool toilet that does not require the user to use toilet paper after they have completed their… business… as the toilet is capable of shooting water from underneath to clean one’s behind)! Although this house would be a house that I would very much admire, designers must keep in mind that the condominium is for the generic human being; therefore they must make it optimal for whoever lives there.

Advertisements

Airplane Testing 3

In my two previous posts, I talked about how I tested two of my airplanes, the far flying airplane and my trick flying airplane. In this post, I will talk about how my straight flying airplane flew.

For the straight flying airplane, the airplane must be able to fly as far as possible in a straight path. In order to do this, I made a gliding airplane build with sturdy wings to prevent it from turning or rolling or going upwards. However, instead of flying straight and far as I thought it would, the airplane flew up and made sharp turns to the right, for the first 3 flights. As a result, I decided to add large ailerons on each wing, to possibly “cut” the wind and force the airplane to fly in a straight path. Ultimately, the plane actually flew in a very straight path without performing any rolls, dives, turns or anything else that would interfere with its flight pattern.

On the final day of tests, I had to fly all 3 of my flights, all of which were upgraded to perform based on their name (far, trick and straight flying airplanes). The first plane that I flew was my straight flying airplane. Instead of doing what it was supposed to be doing when I was testing it, the airplane made a great turn to the right; therefore having a great angle of deviation, which is bad. In the end, the straight flying airplane was a bust, a failure. The second airplane that I flew was the far flying airplane. By increasing the ailerons significantly, the plane flew very far and glided for a long time. But this was only for one of the flights. After the airplane glides, it immediately dives into the ground; thus bending the tip of the airplane harshly, and decreasing the aerodynamics of the airplane. Finally, my final airplane, which was the trick flying airplane flew quite well. I changed the way I threw the plane by launching it upwards with an underhand throw, instead of throwing it in front of me. This way, the trick airplane would have more time to “dance” in the sky. For all 3 of the trick airplane flights, the trick airplane performed nicely, as it performed several loops and some spins (only when it dives into the ground).

Airplanes Testing 2

          In the previous post, I talked about the tests I’ve done to my first paper airplane, the far flying airplane. This time, I’ve tested my second plane, the trick flying airplane. (and by tested I mean in a space with a high ceiling and a wide space without any wind to blow my plane away). In the first couple test flights, I launched the airplane in approximately a 25 degree angle. Oddly enough, the first thing it does is that it dives right into the ground. The trick airplane is supposed to be rated based on the number of spins or loops it does, and how it “dances” in the air. Luckily, when the plane dived into the ground, it made 2-4 spins, which I think is alright for the first test flights. Afterwards, an acquaintance of mine told me to throw the plane upwards, almost vertically, so that when it dives into the ground it would have a chance to gain enough lift and fly upwards; therefore making a loop. I tried doing this, and the results were better than I expected! Instead of plummeting into the ground, the airplane actually made a couple of loops in the sky, and then dive vertically into the ground, while making 2-3 spins also. 

The factor causing the airplane to hit the ground is probably because of the size of the ailerons. As a result, I plan on decreasing the size of the ailerons significantly or even remove them altogether, although this might also limit the tricks that it is capable of doing. So, I might even add elevators in addition to the ailerons to possibly increase the number of loops that it can do before it swirls into the ground. Or maybe I can even fold the airplane wings further downward to increase the lift given to the plane. But I still won’t know the results unless I test the airplane once more, so I might as well do a little more research for creating the best of the best airplanes.


Airplane Testing

          In the previous blog, I talked about how I had to create 3 different airplanes; one that can fly as far as possible, one that flies as straight as possible and one that is capable of doing loops and tricks in the sky. Now that a week has passed, I’ve finally finished all 3 of my airplanes! This website helped me create one of my paper flying airplanes (referred to as the Lightning Paper Airplane in the website). I adjusted some of the ailerons (side flaps) and elevators (bottom of wing flaps) to change some of the flight characteristics. I suggest that everyone take a look at this website. There is a great selection of paper airplanes that could be created, and this site includes a great number of them.

<p><A HREF=”http://www.paperairplanes.co.uk/planes.php”>paper airplane designs</A> – How to make the best paper airplanes for free.</p>

          So far, I have tested my far flying airplane (and by tested I mean in a space with a high ceiling and a wide space without any wind to blow my plane away). The far flying airplane flies and glides for a long time; however in all 6 of my test flights, it kept making U-turns and then landing about 5 feet behind me! This is probably because I folded one of my ailerons too deeply, which made my far flying airplane role too much. Also my angle of attack ranged from around 25 to 40 degrees in all my test flights, which I now think is a little too great for paper airplanes. One more thing that might affect this is that while I was testing my airplane, I launched it with all the force I had, because I thought the harder I threw it, the more thrust it would have. The airplane that I was using for far flying was actually more of a “gliding airplane;” hence as it gains more thrust, there will be more air pressure to increase the lift and then send the plane turning in whatever direction. In my case, making a U-turn behind me. Other paper airplanes with smaller and more narrow wingspans will be able to fly in a straight direction; however without an actual, powerful force acting beneath them, I have found that they would fly only as far as how hard they were thrown. What I want to do is to create an airplane that can fly a straight path and glide without exerting too much force. As a result, I will make a few more adjustments to the far flying paper airplane I have now.

Airplanes of Paper

         The first engine powered airplane was designed and created by the Wright brothers. Through hard work and determination, the brothers became famous, wealthy, and in addition, recognized the dream of being able to soar the skies.

          What I have to do is to create three paper airplanes, all of which are designed to meet a specific flight pattern. One of them must fly as far as any paper airplane can fly. Another needs to fly in a straight path, without crashing into anything or going aloof. Finally, the last airplane must be an acrobatics airplane, as it will be measured on how many loops or turns it can do. To create the airplanes, everything needs to be documented like how the Wright brothers documented all their successful and non-successful creations. As a result, I must keep all the paper airplanes that I create, and write the blueprints that I used for my primary airplanes. This is also a good thing, as I will be able to learn more from my past errors and improve on them as I continue making more airplanes.

          I searched many different airplane designs through the internet and different books. I found many complex paper airplane creations; however they didn’t fly as well as they were difficult to create. In fact, the best airplane design that I found was the generic airplane (in the picture), which was able to fly quite far (compared to the other airplanes that I found). Finally, in order to create my three airplanes, I decided to make a few adjustments to the generic paper airplane designs like folding up the tip of the airplane or cutting the paper to make a vertical stabilizer and rudder. I also attempted making my very own paper airplane designs (of all of these designs, I used one of the airplanes as my acrobatics airplane). 

     In the end, I discovered that the best approach to airplanes is the simplest approach. “Make everything as simple as possible, but not simpler.” – Albert Einstein

Blogging

          The site “WordPress” is mainly used for blogging. Blogging is sharing ideas to other people through the internet, and can be done to inform others about different things or for no reason whatsoever. Before blogging there was threading, which was somewhat like blogs except it was more formal in that it did not include as much personal information or opinions as blogs.

          The reason why I’m blogging is because I think that it’s fun. It’s a way for me to share my ideas to everyone around the world and get feedback, comments or opinions from them, like a diary that everyone can see. What I like about blogging is that it doesn’t need to be too formal (so that it’s more entertaining for the viewer to read and the write to write) and it is not too colloquial (so that people will know whether or not the writer is being serious).

        All in all, this is just a short post about what I think blogging is about. It’s fun.